| 31 - 40 of about 115 for resistance. |
Ceramic Resistors
Resistance Tolerance , K(±10%), M(±20%) , Resistance Range (Ω) , 470 ~ 33K , 1K ~ 56K , 1K ~ 100K , 470 ~ 33K , Max. Working Voltage (V) , ... Moisture Resistance (%) , 10 , 10 , 10 , 10 , How to Order , RMC , A , 2W , 5KR , M , Product Type , Style , Rated Power , Resistance Value (Ω) , Resistance ...
Thick Film Resistors
Resistance Tolerance , Max Working Voltage(KV) , Lmax , Smax , Hmax , I , dmax , RI82-2 , 2 , a , 33 , 8 , 0.8 , , , 10-1000 , ≤200 , J(± ... from RCWW = √ Power Rating × Resistance Value (Ω) , or Max.Working Voltage listed above , whichever two. , Dip Type Dimension ( b, c Style ) , ① Silver Palladium Pole , ② ... ...
Impulse Resistors
Resistance tolerance , Lmax , Dmax , I , D , RI80-1 , 1 , a , 30±2 , 9±1 , 30±3 , 0.7 , 10-1000 , ≤200 , 10 , -55°C , ~ , +70°C ... from RCWW = √ Power Rating × Resistance Value (Ω) , or Max.Working voltage listed above , whichever two. , Product Identification , RI80 , 1W , a , 10MR , G , Product Type , Rated ... ...
High Voltage Glaze Glass Resistors
Resistance Range , 1 × 107 ~ 1 × 1012(Ω) , Resistance Tolerance , (J±5%) (K±10%) , Operating Temperature , -55°C ~ +125°C ... Resistance Value , Resistance Tolerance , - To Top Page , Direct Electronics Tech. Co., Ltd. , Taiwan Tel:+886-2-29810109 Fax:+886-2-29887487 , China Tel:+86- ...
Voltage Resistors
Resistance Range (Ω) , Working Voltage (V) , Ceramic Tubular - RMCD Series , Non-inductance high voltage ceramic tubular resistors offer higher average ... High Resistance - RH1 Type , Glaze Glass High Resistance Resistor features withstanding extreme impulse and short time over load, and applications in micro current ... ...
High Precision Axial Moulded Wirewound Resistors
Resistance Range(Ω) , Tolerance(%) , TCR(PPM/°C) , Dimensions (mm) , Min , Max , A±0.25 , ΦB±0.25 , Φd , F , BWW-0.5 , 0.5 , 0.1 ... Insulation Resistance , 500V , >1GΩ , Dielectric Withstanding Voltage , 500V AC 1 Min. , ΔR ≤ ±0.1%R , Load Life , 70°C on~off cycle 1000 Hrs ... ...
Low-Inductance Wirewound Resistors
resistance wire (metal alloy) wound on a core (usually a ceramic). , The element assembly is then protected by a coating or enclosure of , insulating material ... Resistance Temp. Coeff. , -55 °C ~ 155 °C , ± 300 PPM / °C , Short Time Overload , 10 times of rated wattage for 5 sec. , ± 2 ... ...
Vitreous Enamel Coated Wirewound Resistors
construction consists of a measured length of resistance wire (metal alloy) wound on a core (usually a ceramic). The element assembly is then protected by a coating or enclosure of insulating material (such ... Insulation Resistance , 500V , 20MΩ , Short Time Overload , 2.5 times of rated voltage 5 sec. , ΔR≤±(2%R+0.05Ω) , Rated Load , Rated wattage 30 ... ...
Cement Resistors
SQ Series are made by winding resistance wires around non-alkaline ceramic core or metal oxide film rod, , which is added with a layer of heat and humidity resistant and non-corrosive , ... Resistance Range (Ω) , SQP , W±1 , H±1 , L±1.5 , d±0.05 , SQP , RS+SQP , 2W , 7 , 7 , 18 , 0.5~0.6 , 0.1~82 , 3W , 8 , 8 , ... ...
Resistor Color Code
resistance value for the past time. At present, Token resistor color , coding system is applying for automatization. The first three bands , closest to one ... end of the resistors are used to determine the resistance. , The fourth band represents the tolerance of the resistor. Additional , information can be obtained from the first band. Generally, If an , ... ...