| ITEM |
CONDITIONS |
PERFORMANCE |
| Solderability |
Put the terminals into welding tank at temp. 230±5°C for 2±0.5s (terminal roots are 5mm away from the tin surface). |
wetting>95% |
| Temperature Changing |
Change of temperature in accordance with: TA: -40°C TB: +60°C Number of cycles: 5 Exposure duration: 30min |
Drift of R10 = ± 20% No visible damage |
| Constant humidity and heat |
1. Put the device in test box at Temperature: 60±5°C Humidity: 90-95% Illumination: 0lux Duration: 100h
2. Take the device and measure after24h at normal temperature and humidity. |
Drift of R10= ± 30% No visible damage |
| Constant load Temperature |
At 25±5°C
Illumination: 150lux at rated power
Duration: 600h |
No visible damage |
| Wire Terminals Strength |
Bend the wire terminal at its root to 90 degree,and then bend it to a opposite direction. |
No visible damage |
| Vibration |
Frequency: 50Hz
Swing: 1.5mm with
Directions: parallel to ceramic substrate normal to ceramic substrate. Duration:2h |
No visible damage |