| 21 - 30 of about 120 for Resistance. |
Nonflammable Power Fixed Wirewound Resistors
Determination of End resistance value of FVR, DQS, DSRA, DSRB, BSR, BSQ: , Resistance Range means you can choose one maximum resistance value (End resistance value) at one of FVR, ... After End Resistance Value confirmed, the minimum resistance (start resistance value) will be determined by depending on resistance of wire and wirewound type. , Power Rating of Variable Resistor: , The part ... ...
Power Resistor
Determination of End resistance value of FVR, DQS, DSRA, DSRB, BSR, BSQ: , Resistance Range means you can choose one maximum resistance value (End resistance value) at one of FVR, ... After End Resistance Value confirmed, the minimum resistance (start resistance value) will be determined by depending on resistance of wire and wirewound type. , Power Rating of Variable Resistor: , The part ... ...
Variable Resistors Power Type
resistance element. Except for the slide contact surface, the entire , component is coated with a high-temperature, non-flammable resin. , After cooling and ... which slides along the resistance element and varies the resistance , to the desired value. The scope of the application includes educational , modeling, load simulations, ... ...
Power Wirewound Starter Resistors
wound with alloy wire as a resistance element. The staggering wound , is made according to the desired resistance value, followed by the , placement of the component mounts. It provides ... set number of windings on the ceramic form, the resistance , value range is relatively low. Tolerance is±10% and this , product is available in various shapes or in resistance boxes. Suitable , for ... ...
Variable Power Resistors
as a resistance element, with the mount attachment method the same , as the other described. Except for the sliding contact surface on , the windings, the entire ... that slides directly on the resistance element, which allows variation , of the resistance value (See the specifications of the DR series , and VR series for exact features). Suitable ... ...
Power Resistors
nickel-plated solid copper terminal supports. The resistance element is made of a stainless steel resistance alloy. Terminals are welded or silver brazed to the oval, spiral edgewound resistance element. ... Toothed ceramic insulators isolate the resistance element from the center support. Ceramic end bushings insulate the center support from the mountings. Order individual replacement units or entire ... ...
Assembly Load Voltage Resistors
Assembly-type Resistance Box , PowerRating , Dimensions(mm) , ResistanceRange(Ω) , CASE , A , B , C , D , E , F , G , H , I , J , 200W , A , 345 , 90 , 76 , 325 , 45 , ... Assembly-type Wave Resistance Box , PowerRating , Dimensions(mm) , ResistanceRange(Ω) , CASE , A , B , C , D , E , F , G , H , I , J , 300W , A , 345 , 90 , 76 , 325 , 45 , ... ...
Aluminum Encased Power Resistors
encased consists of an alloy metal coil-type resistance , element assembled into an aluminum enclosure. Following high-temperature , anodization, the enclosure is filled with a special non-flammable , ... coefficient, with resistance varying in direct proportion. Supporting , a flexible range of applications, the product is easy to utilize , and install. Applications include ... ...
Power Aluminum Housed Wirewound Resistors
Resistance Range (Ω) , Max. Working (V) , Proper heat sink(Aluminum chassis) , AHInductive , AHNNon-inductive , AHInductive , AHNNon-inductive , AH-25L , ... Moistrue Resistance , Temp 40°C moisture 95% DC 100V 500Hr , Δ R±(1%+0.1Ω) Max. , Moisture Load Life , Temp 40°C moisture 95% 1/10 × ... ...
Wirewound Aluminum Housed Power Resistors
Resistance Tolerance: 10%, 5%, 3%, 2%, 1%, 0.5% , Operating Temperature Range : -55% to +275°C , Dielectric Strength: AH-5 AH-10 AH-25 1000V AH-50 1500V , ... Resistance Range (Ω) , Type , Industry , Military , ± 0.05%, ±0.1% , ±0.25% , ±0.5% , ±1%,±5%,±10% , AH-5 ... ...