CS Series - TCR 100~600PPM, Chip Current Sense Resistors
TCS Series - Thin Film Current Sense Chip Resistor
BWL Series - Low Resistance, Low Inductance Resistors
Packaging Quantity (Unit: pcs)
Type
Emboss Plastic Tape
LRC12
2,000
Emboss Plastic Tape Specifications (Unit: mm)
Resistance (mΩ)
A
B
W
E
F
P0
P1
P2
ΦD0
T
0.50
3.40±0.1
6.70±0.1
12.0±0.1
1.75±0.1
5.5±0.05
4.0±0.05
4.00±0.1
2.0±0.05
1.50+0.1
1.40±0.1
0.75
3.50±0.1
6.80±0.2
12.0±0.1
1.75±0.1
5.5±0.05
4.0±0.05
4.00±0.1
2.0±0.05
1.50+0.1
1.35±0.1
1~20
3.40±0.1
6.70±0.1
12.0±0.1
1.75±0.1
5.5±0.05
4.0±0.05
4.00±0.1
2.0±0.05
1.50+0.1
0.80±0.1
Notice:
1. The cumulative tolerance of 10 sprocket hole pitch is ±0.2mm.
2. Carrier camber shall be not more than 1mm per 100mm through a length of 250mm.
3. A & B measured 0.3mm from the bottom of the packet.
4. t measured at a point on the inside bottom of the packet to the top surface of the carrier.
5. Pocket position relative to sprocket hole is measured as the true position of the pocket and not the pocket hole.
Environmental Characteristics
Item
Specification
Test Method
Black coating
Green coating
Temperature Coefficient of Resistance
As Spec.
MIL-STD-202 Method 304 +25/-30/+25/+130/+25°C
Thermal Shock
±0.5%+0.5mΩ
±1%
MIL-STD-202 Method 107G -55°C~150°C, 100 cycles
Short Time Overload
±0.5%+0.5mΩ
±1%
JIS-C-5202-5.5 RCWV*2.5 or Max Overloading Voltage, 5 seconds
Resistance to Dry Heat
±1%+0.5mΩ
±1%
JIS-C-5202-7.2 96 hours @ +125°C without load
Load Life
±1%+0.5mΩ
±1%
MIL-STD-202 M108 RCWV, 70°C, 1.5 hours on, 0.5 hours off 1000~1048 hours