Current Sense Resistor
Environmental CharacteristicsLow Ohmic Resistor
Item Specification Test Method
Temperature Coefficient of Resistance As Spec MIL-STD-202F Method 304
+25/-55/+25/+125/+25°C
Short Time Overload ±0.5% JIS-C-5202-5.5
RCWV*2.5 or Max Overloading Voltage 5seconds
Dielectric Withstand Voltage by Type MIL-STD-202F Method 301
Apply Max Overload Voltage for l minute
Insulation Resistance >1000MΩ MIL-STD-202F Method 302
Apply 100VDC for 1minute
Thermal Shock ±0.5% MIL-STD-202F Method 107G
-55°C~150°C, 100cycles
Load Life ±1% MIL-STD-202F Method 108A
RCWV, 70°C, 1.5 hours on ,0.5 hours off
Total 1000~1048 hours
Humidity (Steady State) ±0.5% MIL-STD-202F Method 103B
40°C, 90~95%RH, RCWV 1.5 hours ON,
0.5 hours OFF, total 1000 ~ 1048 hours
Resistance to dry heat ±0.5% JIS-C-5202-7.2
96hours @ +155°C without load
Low Temperature Operation ±0.5% JIS-C-5202-7.1
1hour, -65°C followed by 45minutes of RCWV
Bending Strength As Spec JIS-C-5202-6.1.4
Bending Amplitude 3mm for 10seconds
Solderability 95%min coverage MIL-STD-202F Method 208H
245°C±5°C, 2±0.5 (sec)
Resistance to Soldering Heat ±0.5% MIL-STD-202F Method 210E
260±5°C, 10±1 seconds
Note: Storage Temperature: 25±3°C; Humidity: <80%RH

How to Order
TCS 12 J T F S R010 N
Product Type Dimensions
(L×W)		 Resistance
Tolerance		 Packaging TCR Power
Rating		 Resistance Marking
02 (0402) (1.00×0.50mm)
03 (0603) (1.60×0.80mm)
05 (0805) (2.00×1.25mm)
06 (1206) (3.10×1.55mm)
10 (2010) (5.00×2.50mm)
12 (2512) (6.30×3.10mm)		 J (±5%)
F (±1%)
D (±0.5%)		 T (Taping Reel)
P (Bulk)		 D (±50PPM/°C)
E (±100PPM/°C)
F (±200PPM/°C)		 R (3W)
S (2W)
A (1.5W)
T (1W)
Q (3/4W)
U (1/2W)
V (1/4W)
W (1/8W)
X (1/10W)
Y (1/16W)
Z (1/32W)		 R010 (0.010Ω)
R100 (0.100Ω)
1R00 (1.000Ω)
R100 (0.100Ω)		 Standard Marking
N (No Marking)

- To Top Page
Page: 1 / 2 / 3

Direct Electronics Tech. Co., Ltd.
Taiwan Tel:+886-2-29810109 Fax:+886-2-29887487
China Tel:+86-755-26055363 Fax:+86-755-26055365