德利特電子的塑封模壓薄膜功率電阻器，符合RoHS規範，Lead-Free無鉛標準，使用Lead-Free Logo無鉛標誌。
TO-220 RMG35 封裝系列，通常與其它功率IC一起安裝在散熱器旁邊，於25°C的溫度，最高功率可達 35 瓦。TO-220 塑封模壓型包裝使得安裝更容易，保護性高，高絕緣度，低/無感量。 |
|
 |
| Derating Curve |
 |
| 尺寸 (單位: mm) |
 |
||||||||||||||
| 規格 | W | H | T | T1 | T2 | B | B1 | C | D | D1 | G | R | M | N |
| RMG35 | 9.91 ~ 10.41 |
14.50 ~ 15.00 |
4.06 ~ 4.82 |
0.55 ~ 0.70 |
2.05 ~ 2.52 |
12.70 ~ 14.70 |
4.00 | 4.83 ~ 5.33 |
0.70 ~ 0.86 |
1.17 ~ 1.37 |
2.85 ~ 3.05 |
3.55 ~ 3.75 |
5.85 ~ 6.35 |
1.20 ~ 1.40 |
| 電氣特性 |
| 阻值範圍 | 阻值公差 | 溫度系數(PPM/°C) |
| 0.05Ω~1Ω | ±5.00% ±10.0% |
- |
| >0.1Ω~1Ω | ±1.00% ±5.00% ±10.0% |
- |
| >1Ω~3Ω | ±1.00% ±5.00% ±10.0% |
±300 |
| >3Ω~10KΩ | ±1.00% ±5.00% ±10.0% |
±100 ±200 |
| >10Ω~10KΩ | ±0.50% ±1.00% ±5.00% ±10.0% |
±50 ±100 ±200 |
|
| 環境測試條件 |
| 項目 | 規格標準 | 測試條件 |
| 溫度系數 | 10Ω and above, ±50ppm/°C 1Ω and 10Ω, (±100ppm)/°C |
Referenced to 25°C, ΔR taken at +105°C |
| 短時間過負載 | Δ R±0.3% | 2 times rated power with applied voltage not to exceed 1.5 times maximum continuous operating voltage for 5 seconds. |
| 負載壽命 | Δ R±1.0% | MIL-R-39009,2,000 hours at rated power. |
| 耐濕性 (穩定狀態下) | Δ R±0.5% | MIL-STD-202F, Method 103B 40°C, 90~95%RH, RCWV 1.5hours ON, 0.5hours OFF. total 1000~1048 hours. |
| 耐熱性 | Δ R±0.3% | MIL-STD-202, Method 107G. -65°C~150°C,100 cycle |
| 端子強度 | Δ R±0.2% | MIL-STD-202, Method 211, Cond.A (Pull Test) 2.4N. |
| 高頻率震動 | Δ R±0.2% | MIL-STD-202, Method 204, Cond.D. |
|
| 如何訂購 - TO-220 薄膜功率電阻 |
| RMG | 35 | J | P | D | 10R | |||||||||||||||||||||||||||||||||||||||||||
 |
|
|
|
|
|
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|
|
|
|||||||||||||||||||||||||||||||||||||||||||
| To Top Page | 德利特電子科技(深圳)有限公司 台灣電話：+886-2-29810109；傳真：+886-2-29887487 大陸電話：+86-755-26055363；傳真：+86-755-26055365 |