| 包裝數量 (單位: pcs) |
| 規格 | 內襯塑帶 |
| LRC12 | 2,000 |
| LRC10 | 2,000 |
| LRC06 | 2,000 |
| 內襯塑帶規格 (單位: mm) |
 |
||||||||||||
| 尺寸 | 阻值 (mΩ) | A | B | W | E | F | P0 | P1 | P2 | ΦD0 | ΦD1 | T |
| LRC12 | 0.50~7 | 3.40±0.1 | 6.73±0.1 | 12.0±0.1 | 1.75±0.1 | 5.5±0.05 | 4.0±0.1 | 4.00±0.1 | 2.0±0.05 | 1.50±0.10 | 1.4min | 0.81±0.1 |
| 0.50~15 | 3.40±0.1 | 6.75±0.1 | 12.0±0.1 | 1.75±0.1 | 5.5±0.05 | 4.0±0.1 | 4.00±0.1 | 2.0±0.05 | 1.55±0.05 | 1.4min | 0.80±0.1 | |
| LRC10 | 1~10 | 2.85±0.1 | 5.55±0.1 | 12.0±0.2 | 1.75±0.1 | 5.5±0.05 | 4.0±0.1 | 4.00±0.1 | 2.0±0.05 | 1.55±0.05 | 1.4min | 0.85±0.1 |
| LRC06 | 1~10 | 1.90±0.1 | 3.60±0.1 | 8.0±0.2 | 1.75±0.1 | 3.5±0.05 | 4.0±0.1 | 4.00±0.1 | 2.0±0.05 | 1.55±0.05 | 1.0min | 0.87±0.1 |
| Notice:
1.The cumulative tolerance of 10 sprocket hole pitch is ±0.2mm.
2.Carrier camber shall be not more than 1mm per 100mm through a length of 250mm. 3.A & B measured 0.3mm from the bottom of the packet. 4.t measured at a point on the inside bottom of the packet to the top surface of the carrier. 5.Pocket position relative to sprocket hole is measured as the true position of the pocket and not the pocket hole. |
| 降額曲線 |
 |
| 環境測試 |
| 項目 | 標準 | 測試方法 | |
| Black coating | Green coating | ||
| 耐熱性 | ±0.5% | ±1% | MIL-STD-202 條件 107G -55°C~150°C, 100 次循環 |
| 短時間過負載 | ±0.5% | ±1% | JIS-C-5202-5.5 5* 額定功率, 5 seconds |
| 負載壽命 | ±1% | ±1% | 70±2°C, 最大工作電壓 1000 hrs 1.5 小時開, 0.5 小時關 |
| 耐乾熱性 | ±1% | ±1% | +170°C, 1000 hrs |
| 耐乾接熱 | ±0.5% | ±1% | MIL-STD-202F Method 210E 260±5°C, for 10 seconds |
| 焊接性 | 95% 最少覆蓋 | MIL-STD-202F 條件 210E 245±5°C, 3 seconds |
|
| 溫度系數 | 視規格而定 | MIL-STD-202 條件 304 +25/-55/+25/+125/+25°C |
|
| Remark:
1. 綠色塗裝的產品不適用於波峰焊.
2. 儲存溫度： 25±3°C；濕度：< 80%RH. |
| 如何訂購 |
| LRC | 12 | J | TR | D | B | R006 | G | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
|
|
|
|
|
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| To Top Page |
| Page: 1 / 2 |
| 德利特電子科技(深圳)有限公司 臺灣電話﹕+886-2-29810109﹔傳真﹕+886-2-29887487 大陸電話﹕+86-755-26055363﹔傳真﹕+86-755-26055365 |