| 1 - 10 of about 139 for resistance. |
Inductor Resistor Saw Ceramic Dielectric Coils - Direct Site Map
TCS Series - Thin Film Chip Low Resistance, High Precision Tolerance , LRA Series - Low Ohmic Open Air Type , LRB Series - Ultra Low Resistance Power Wire , LRC Series - Chip Low Ohmic, Low ... BWL Series - Power Type Low Resistance, Low Inductance Resistor , Chip RF Inductors (550KB) , AD Series - Non-Flat Top Air Core Chip Inductors , AM Series - Chip Flat Top Air Core ... ...
Multilayer Chip Beads Inductors
Resistance to Soldering Heat , Appearance: No damage More than 75% of the terminal electrode should be covered with solder. Impedance: within ± 30% of ... Humidity Resistance , Temperature: 40 ± 2°CRelative Humidity: 90 ~ 95% time: 1000hrsMeasured after exposure in the room condition for 24hrs , High ... ...
Multilayer Chip Beads
Resistance to Soldering Heat , Appearance: No damage More than 75% of the terminal electrode should be covered with solder. Impedance: within ± 30% of ... Humidity Resistance , Temperature: 40 ± 2°CRelative Humidity: 90 ~ 95% time: 1000hrsMeasured after exposure in the room condition for 24hrs , High ... ...
Chip Wirewound Inductor
65293; High resistance to heat, humidity, mechanical shocks and presser. Accurate dimensions for automatically surface mounted. , － The product has good heat ... DC resistance: AX-111A DIGITAL MILLIOHM METER, or equivalent. , Electrical Characteristics for TREM453232N(1812) Series , Part Number , Inductance(µH) , ... ...
Chip Wirewound Inductor
65293; High resistance to heat, humidity, mechanical shocks and presser. Accurate dimensions for automatically surface mounted. , － The product has good heat ... DC resistance: AX-111A DIGITAL MILLIOHM METER, or equivalent. , Electrical Characteristics for TREC453232N(1812) Series , Part No. , Inductance(µH) , Q(min ... ...
Wirewound SRF Chip Inductors
Resistance to Soldering-Heat , Solder Temperature: 260±5°C Immersion Time: 10±2sec , Component Adhesion (Push Test) , 1 lbs. For 0402 2 lbs. ... Resistance to Solvent Test , No damage on appearance and marking. , MIL-STD202F, Method 215D , Mechanical Performance Test , Item , Specification , Test Method ... ...
Multilayer Ferrite Chip Inductor
DC Resistance RDC , AX-1152B , Rated Current IDC , Applied the current to coils, The inductance change should be less than 10% to initial value , ... Resistance to Soldering Heat , Appearance: No damage , More than 75% of the terminal. , Electrode should be covered with solder. , Inductance: within ± ... ...
Network Resistor
relatively consistent with Tolerance of Nominal Resistance and Temperature Coefficient and are good for applications like Precision Instruments, Simulation Equipments, etc... , UPSC series comes with more ... size by comparing to UPR,but UPR series has wider resistance range. , Dimensions and Technical Characteristics , Dimensions (mm) , A , 7.65± 0.3 , B , 8.6± 0.3 , C , 2.6± 0.3 , D , 0.6 & ... ...
Precision Network Resistors
Resistance and Temperature Coefficient and are good for applications , like Precision Instruments, Simulation Equipments, etc... , The electric characteristics ... Nominal Resistance Range (Ω) , 10 ~ 5M , 1K ~ 1M , Nominal Resistance Tolerance (%) , A2(±0.02), A5(±0.05), B(±0.1) , T(±0.01), A2(& ... ...
Precision Network Resistors
relatively consistent with Tolerance of Nominal Resistance and Temperature Coefficient and are good for application's Precision Divider, Bypass, etc... , UPRNS/UPRND Series are assembled by EE/RE 1/10 series ... Nominal Resistance Range of component element unit (Ω) , 10 ~ 1M , Absolute Tolerance (%) , A2(±0.02), A5(±0.05), B(±0.1), C(±0.25), D ... ...