| 21 - 25 of about 25 for component. |
Nonflammable Flat Wirewound Power Resistor
process before the final installation of the component mounts. It , is mainly utilized for industrial installations where height is limited. , Features excellent windings, taps adding, low impedance, ...
Ceramic Resonator
need for external loading capacitors and reduces component count, increases reliability and reduces size. , ZTT Series - Murata CST, PDF file (137KB) , Dip , 1.79~60.00 MHz , CST , SMD ZTAC / ZTTC Series , ... need for external loading capacitors and reduces component count, increases reliability and reduces size. , ZTAC/ZTTC Series - Murata CSAC/CSTC, PDF file (113KB) , Chip , 1.79~50.00 MHz , CSAC/CSTC , KHz Type ...
Ceramic Resonator
loading capacitors and reduces component count, increases reliability , and reduces size. , ZTAC series functions same as the ZTA series with two terminals , without capacitor.These unit ...
Ceramic Resonator Capacitor
loading capacitors and reduces component count, increases reliability and reduces size. These unit are offered in the frequency range , from 1.79 MHz to 60.00 MHz with an initial frequency ...
Wirewound SRF Chip Inductors
Component Adhesion (Push Test) , 1 lbs. For 0402 2 lbs. For 0603 3 lbs. For the rest , The device should be soldered (260±5°C for 10 seconds) to a ... force gauge should be applied to the side of the component. The device must with stand a minimum force of 2 or 4 pounds without a failure of adhesion on termination , Drop Test , No damage , Dropping chip by ...