| 11 - 20 of about 25 for component. |
TO-220 Power Resistors
with a Thermocouple Contacting the Center of the Component Mounted on the Designed Heat Sink. , Thermal Grease Should be Applied Properly. , How to Order , RMG , 35 , J , P , D , 1001 , Product Type , TO-220 ...
TO-220 Power Resistors Thin Film
with a Thermocouple Contacting the Center of the Component Mounted on the Designed Heat Sink. , Thermal Grease Should be Applied Properly. , How to Order , RMG , 50 , J , P , D , 1001 , Product Type , TO-220 ...
TO-247 Power Resistors
with a Thermocouple Contacting the Center of the Component Mounted on the Designed Heat Sink. , Thermal Grease Should be Applied Properly. , How to Order , RMG , 100 , J , P , D , 1001 , Product Type , TO-247 ...
Resistor Coil Inductor - Direct Usefull Links
silicon and component content to the toy, game, home appliance, human interface, connectivity and other related consumer markets. , www.spectrumrep.com , ACP Components - ...
Power Resistors
Except for the slide contact surface, the entire component is coated with a high-temperature, non-flammable resin. , FVR Series - PDF (368KB) , Screw , 25~100W , Power Variable Adjustable Type - BSR,BSQ ...
Aluminum Encased Power Resistors
a high-temperature process. Since the component is embedded , in the heat-proof cement, it is not affected by external mechanical , force, dusty environments, and extreme duty. It is durable, , ...
Wave Shape Ribbon Power Resistors
drying through a temperature process and then the component mounts are attached. , The resistance value range is relatively low due to alloy material limitations; see the DR series if upper resistance values ...
Variable Power Resistors
the windings, the entire component is coated with a high-temperature , non-flammable resin. The adjustment mechanism is a rotating point , that slides directly on the resistance ...
Power Wirewound Starter Resistors
placement of the component mounts. It provides high starter power , and is durable, is high temperature-resistant, dissipates heat well, , has a low temperature coefficient ...
Variable Resistors Power Type
component is coated with a high-temperature, non-flammable resin. , After cooling and drying, insulation is applied through a high-temperature , process. ... Then, a centered rotating adjuster component is installed, , which slides along the resistance element and varies the resistance , to the desired value. The scope of the application includes ...