| 1 - 10 of about 25 for component. |
SMD EMI Filters Common Mode Choke
Component should not be damaged , Test Voltage: 2.5 Times Rated Voltage Testing Time: 60 sec. Charge Current: 0.5mA , Rated Voltage (VDC) , Test Voltage: Rated ... Component Adhesion (push Test) , Base: 0805 ≥ 2 Lbs Cover: 0805 ≥ 1 Lbs Base: 1206 ≥ 4 Lbs Cover: 1206 ≥ 2 Lbs , The component should be soldered ( ... ...
Precision Network Resistors
Nominal Resistance Range of component element unit (Ω) , 10 ~ 1M , Absolute Tolerance (%) , A2(±0.02), A5(±0.05), B(±0.1), C(±0.25), D(±0.5), F(& ... (Tolerance and Temperature Coefficient) of component element units of Network Resistor are independent.Relative value means the maximum difference factor among component element units of Network ... ...
Precision Resistor Network- Direct Electronics
Nominal Resistance Range of component element unit (Ω) , 10 ~ 1M , Absolute , Tolerance (%) , A2(±0.02), A5(±0.05), B(±0.1), , C(±0.25), D(±0.5 ... (Tolerance and Temperature Coefficient) of component element units of Network Resistor are independent.Relative value means the maximum difference factor among component element units of Network ... ...
Resistor Precaution Usage
rated capacity; do not use a component having the exact load value , required. For considerations of safety in extended period applications, , the rating should be more than four times ... circuits is a normal phenomenon and the component can be safely utilized.Never , use organic solvents to clean non-flammable resistors. , Non-flammable resistors cannot be utilized in oil. Non- ... ...
Chip Resistors
in Taiwan. Chip resistor are general passive component which is useful for derating voltage, current controlling in circuit and surface mounting is available. , CHIP RESISTORS , Chip resistor of ...
Voltage Resistors Saw Power Inductor Dielectric Filters
Dissipation Resistor are the most commonly used component in electronics and their purpose is to create specified values of current and voltage in a circuit. A number of different resistors are shown in the ...
RF Inductor Precision Resistors Ceramic Resonators Dielectric Saw Filters Product Index
Electrode Leadless Face - a leadless cylindrical component that is metallized on two ends. It is designed majorly as a SMD component. Since manufacturing process of MELF resistor is more complex than flat- ...
MELF Resistors
Electrode Leadless Face - a leadless cylindrical component that is metallized on two ends. , It is designed majorly as a SMD (Surface Mounting Device) component. Since manufacturing process of MELF resistor ...
TO-220 Power Thin Film Resistors
with a Thermocouple Contacting the Center of the Component Mounted on the Designed Heat Sink. , Thermal Grease Should be Applied Properly. , How to Order - TO-220 Power Resistors , RMG , 20 , J , P , D , 1K ...
TO-220 Thin Film Power Resistors
with a Thermocouple Contacting the Center of the Component Mounted on the Designed Heat Sink. , Thermal Grease Should be Applied Properly. , How to Order - TO-220 Power Resistors , RMG , 30 , J , P , D , 1K ...